American Flags

Same-day shipping is available on our variety of American flag stock designs.

A variety of American flag patches are stocked in-house and offered at discounted rates. So, before you place your customized orders, take a look at our current inventory. We may already have the design in stock without even incurring a set-up charge. For application settings and information, check out our Application Instructions.

Need Some Help?

From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.

Top and Bottom Heat

Top Heat Only

Application Instructions: Garments

  • Mount the garment. Make sure the garment is wrinkle-free.
  • Place the emblem with the adhesive facing down. There should only be one layer of fabric between the emblem and the platen.
  • Activate the Heat Press. Let the cycle finish. If the machine is manual, make sure to pull the lever as soon as the machine beeps.
  • Check the integrity of the emblem. There should be a strong bond with the fabric. Check emblem is straight and on right location.
Low Melt Temperature 365° F
Low Melt Pressure 50 – 60 Psi
Industrial Temperature 400° F
Industrial Pressure Medium High (60 – 80 Psi)
Dwell Time (Low Melt And Industrial) 10 – 12 Seconds

Application Instructions: Hats

  • Pre-heat mold 10-15 times, 12 seconds each time. This is done only once without the hat mounted so the silicone rubber pad stays hot throughout the application process.
  • Mount the hat with the headband inside of the cap pulled out. Depending on the location, the hat must be mounted using the ‘stretcher’ located on the bottom of the heat press. Make sure there is no space between the mold and hat. Pre-heat the hat for 25 seconds.
  • Place emblem on hat using thermal tape.
  • Pull down lever to activate the press. When press beeps, pull up lever quickly.
  • Check the integrity of the emblem. There should be a strong bond with the fabric. Check emblem is straight and on right location.
Top Temperature 375 – 380° F
Pressure Medium – High (60 – 80 Psi)
Dwell Time 25 Seconds

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.