Sublimated Patches

Digitally printed patches that are photorealistic and industrial wash capable.

Create full color patches with your custom text and artwork. Like our embroidered emblems, Sublimated Patches  have a merrow border sewn in your choice of thread color. These come in both standard and custom shapes and sizes.

Perfect Print Process

Additional Information & Benefits

World Emblem also offers a Perfect Print® Sublimation System, allowing you the ability to manufacture your own emblems. Through a secure online catalog, you can produce emblems on-demand and at a fraction of the cost of outsourcing the production. The Perfect Print® Sublimation System includes a printer, software, templates, paper, ink and blanks.

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.

For technical & application information please visit www.worldemblem.com/technical

Need Some Help?

From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.

Heat Seal Application

Low Melt Application

Application Instructions: Garments

  • Mount the garment. Make sure the garment is wrinkle-free.
  • Place the emblem with the adhesive facing down. There should only be one layer of fabric between the emblem and the platen.
  • Activate the Heat Press. Let the cycle finish. If the machine is manual, make sure to pull the lever as soon as the machine beeps.
  • Check the integrity of the emblem. There should be a strong bond with the fabric. Check emblem is straight and on right location.
Low Melt Temperature 320° F Bottom Heat
Low Melt Pressure Medium (50 – 60 Psi)
Industrial Temperature 400° F
Industrial Pressure Medium High (60 – 80 Psi)
Dwell Time (Low Melt And Industrial) 10 – 12 Seconds

Application Instructions: Hats

  • Pre-heat mold 10-15 times, 12 seconds each time. This is done only once without the hat mounted so the silicone rubber pad stays hot throughout the application process.
  • Mount the hat with the headband inside of the cap pulled out. Depending on the location, the hat must be mounted using the ‘stretcher’ located on the bottom of the heat press. Make sure there is no space between the mold and hat. Pre-heat the hat for 25 seconds.
  • Place emblem on hat using thermal tape.
  • Pull down lever to activate the press. When press beeps, pull up lever quickly.
  • Check the integrity of the emblem. There should be a strong bond with the fabric. Check emblem is straight and on right location.
Top Temperature 375 – 380° F
Pressure Medium – High (60 – 80 Psi)
Dwell Time 25 Seconds

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.