Embroidered Patches

Patches are easily applied to professional garments, tote bags, hats, and more.

World Emblem provides you with the best products possible. Embroidered Patches are created with high quality, colorfast, polyester threads and fabrics made to withstand industrial washes. Each patch can be dye-cut into custom shapes and sizes as well as several standard sizes.

Custom Embroidery

Additional Information & Benefits

Embroidered patches are designed to give the high quality look of direct embroidery without the commitment. These patches are removable emblems with thin stitched borders. They can be applied in-house which save both time and money on freight. Patches are also available with a thick merrow border to allow patches to be easily sewn onto apparel. Because of the flexibility of this product, both in its design and production, the possibilities are endless.
 

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.

For technical & application information please visit www.worldemblem.com/technical

Need Some Help?

From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.

Heat Seal Application

Low Melt Application

Application Instructions: Garments

  • Mount the garment. Make sure the garment is wrinkle-free.
  • Place the emblem with the adhesive facing down. There should only be one layer of fabric between the emblem and the platen.
  • Activate the Heat Press. Let the cycle finish. If the machine is manual, make sure to pull the lever as soon as the machine beeps.
  • Check the integrity of the emblem. There should be a strong bond with the fabric. Check emblem is straight and on right location.
Low Melt Temperature 320° F Bottom Heat
Low Melt Pressure Medium (50 – 60 Psi)
Industrial Temperature 400° F
Industrial Pressure Medium High (60 – 80 Psi)
Dwell Time (Low Melt And Industrial) 10 – 12 Seconds

Application Instructions: Hats

  • Pre-heat mold 10-15 times, 12 seconds each time. This is done only once without the hat mounted so the silicone rubber pad stays hot throughout the application process.
  • Mount the hat with the headband inside of the cap pulled out. Depending on the location, the hat must be mounted using the ‘stretcher’ located on the bottom of the heat press. Make sure there is no space between the mold and hat. Pre-heat the hat for 25 seconds.
  • Place emblem on hat using thermal tape.
  • Pull down lever to activate the press. When press beeps, pull up lever quickly.
  • Check the integrity of the emblem. There should be a strong bond with the fabric. Check emblem is straight and on right location.
Top Temperature 375 – 380° F
Pressure Medium – High (60 – 80 psi)
Dwell Time 25 Seconds

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.